How To Turn a Longboard Into An Electric Longboard: DIY Kit

Introduction

Longboarding has been popular for many years as an activity that’s great for getting around quickly and having fun. But what if you want to take your longboarding experience to the next level? Turning a regular longboard into an electric longboard can be a fun, rewarding project that gives you an exhilarating ride.

In this blog post, we’ll look at how to turn a regular longboard into an electric one, from the parts you need to the build process itself. We’ll also explore the benefits of creating your own electric longboard and how you can customize it to make it your own.

What You’ll Need

Assuming you have a longboard and a motor:

1. You’ll need a motor mount to attach the motor to the longboard. There are many different designs and ways to do this, so finding a tutorial or video online that outlines how to do this specific to your longboard and motor combination is crucial.

2. You’ll need a way to power your motor. This usually means attaching a battery pack to your longboard in some way. Again, there are many ways to do this, so finding a tutorial or video that outlines how to do this specific to your longboard and battery pack combination is crucial.

3. Once you have the motor and battery mounted on the longboard, you’ll need to wire them together. This usually involves soldering some wires and/or connecting some quick-disconnect plugs. Once again, because there are many different ways to wire an electric longboard, finding a tutorial or video that outlines how specifically to wire your particular setup is essential.

4. Finally, you may want or need some additional parts or accessories for your best electric longboard, such as a speed controller (to control how fast the motor spins) or LED lights (to make your board more visible at night). These sorts of things are generally not necessary, but they can be nice to have if you want them.

Must Read: Can You Ride an Electric Skateboard Normally? People Asked Question

Which Tool Need to Convert the Longboard into an Electric Longboard

Here is a list of tools that you may need to convert a longboard into an electric longboard:

  • Electric drill: You will need an electric drill to make holes in the deck of the longboard for mounting the motor and battery.
  • Screwdriver: You will need a screwdriver to install the trucks and wheels onto the longboard, and to secure the components of the electric conversion kit to the deck.
  • Wrench: Some kits may require you to use a wrench to tighten bolts and secure components to the deck.
  • Soldering iron: If your kit includes a controller with a separate motor wire, you may need to use a soldering iron to connect the two wires together.
  • Wire stripper: You will need a wire stripper to remove the insulation from the wires in the kit so that you can make connections.
  • Heat shrink tubing: Heat shrink tubing can be used to insulate connections and protect them from moisture and other elements.
  • Multimeter: A multimeter can be helpful for testing the electric components of the longboard to ensure that they are working properly.

These are the most common tools that you will need to convert a longboard into an electric longboard. You may need additional tools depending on the specific conversion kit that you are using. Be sure to follow the instructions provided with the kit carefully to determine the tools you will need.

Also Read: How Hard is it to Ride an Electric Skateboard

Convert The Longboard Into An Electric Longboard Step by Step Process

Here are the steps you can follow to turn a longboard into an electric longboard:

  1. Choose a longboard that is in good condition and has a sturdy deck. This is important because the electric components will add extra weight to the board, and you want to make sure the deck can support it.
  2. Purchase an electric longboard conversion kit. These kits typically include a motor, a battery, a controller, and all the necessary wiring and hardware to connect everything together.
  3. Remove the trucks and wheels from the longboard. This will give you access to the deck, which you will need to drill holes into in order to mount the motor and battery.
  4. Follow the instructions provided with the conversion kit to mount the motor and battery to the longboard. This will typically involve drilling holes in the deck and using screws or bolts to secure the components in place.
  5. Connect the wires from the motor to the controller, and connect the controller to the battery. Make sure all connections are secure and well insulated to prevent short circuits.
  6. Install the trucks and wheels onto the longboard.
  7. Test the electric longboard to make sure everything is working properly. If you have any issues, refer to the instructions provided with the conversion kit or reach out to the manufacturer for support.

Step 1: Remove the old trucks and wheels

If you’re looking to upgrade your longboard with a little electric power, the first step is to remove the old trucks and wheels. This process is relatively simple and only requires a few tools.

First, use a skate tool or an allen wrench to loosen the kingpin nut at the base of the truck. Once this is loose, you should be able to remove the hanger (the metal part of the truck that holds the wheels) from the baseplate (the plastic part of the truck that attaches to the deck). Repeat this process for both trucks.

Next, use a socket wrench or a skate tool to remove the axle nuts that hold the wheels in place. You should now be able to remove the wheels from the trucks.

With the old trucks and wheels removed, you’re now ready to install your new electric longboard components!

Step 2: Attach the motor to the deck

It’s time to attach the motor to the deck! You’ll need 4 screws and 4 washers for this step.

First, line up the holes in the base of the motor with the holes in your longboard deck. Then, place a screw through each hole, followed by a washer.

Tighten the screws until the motor is securely attached to the deck. Be careful not to over-tighten, as this could damage both the motor and the deck.

Step 3: Attach the battery pack

Assuming you have already installed the electric motor (see Step 2), the next step is to attach the battery pack. Most electric longboards will come with a battery and charger, but if you are using a separate battery, make sure it is properly charged before proceeding.

To attach the battery pack, first find the spot on the deck where it will sit. You want it to be as close to the center of gravity as possible for balance, but also in a place where it won’t get in the way of your feet or be too difficult to reach. Once you have found the perfect spot, use velcro or zip ties to secure the battery in place.

Now all that’s left is to connect the power wires from the battery to the motor. Consult your motor’s instructions for specifics on how to do this, but in general, you just need to connect the positive and negative terminals of the battery to the corresponding terminals on the motor. Once everything is connected, give it a quick test ride to make sure everything is working properly before hitting the streets!

Step 4: Reassemble the longboard

Assuming you have all the necessary parts and tools, reassembling your longboard is relatively straightforward. Start by attaching the trucks to the deck using the provided bolts. Then, attach the wheels to the trucks. Make sure the bearings are properly seated in the wheels before tightening everything down. Next, connect the motor to the controller and mount them both to the deck. Once everything is in place, tighten all the bolts and screws. Finally, connect the battery pack to the controller and turn on your longboard!

Step 5: Test it out!

Now that you’ve put all the pieces together, it’s time to test out your new electric longboard! Before you take it for a spin, make sure to do a quick safety check. Check that the battery is properly secured and that all the wires are properly connected. Also, make sure you’re wearing proper safety gear, including a helmet and knee pads.

Once you’ve done that, it’s time to hit the streets! Start by slowly cruising around your neighborhood. Get a feel for how the longboard rides and how much power the motor has. Once you’re comfortable, you can start testing out its limits. Try going up hills and see how well the motor handles them. See how fast you can go without losing control. And most importantly, have fun!

How to turn a Longboard into an Electric Longboard

FAQ

Can I turn my longboard into electric longboard?

Yes, you can. There are kits available to buy on the market to convert any longboard into an electric board in just a few minutes.

Can I put a motor on my skateboard?

Sure, but you’re going to have some trouble with stability and braking.

Can you go down ramps on a longboard?

Yes, but the most difficult direction to go down a ramp is when the ramp is at a 90-degree angle to the longboard.

What parts do you need to build an electric longboard?

You will need screws and nuts to attach the electric motor, battery and wheels together. You’ll also need a metal shaft that goes from the electric motor to the longboard deck.

How much does it cost to make a longboard?

It can cost anywhere from $100 to well over $1000, depending on the quality of the materials and desired design.

Conclusion

With the right tools and instructions, turning a longboard into an electric longboard is a simple process that anyone can do. The end result will be a powerful e-longboard with increased speed, range and versatility that you can enjoy for many years to come. We hope that this guide has given you all the information you need to get started on your own project. Good luck and have fun!

Leave a Comment