How to Slide on a Longboard: Coleman Slide Technique

Longboarding is a popular amongst teens and young adults. Longboards are like skateboards but they are longer and they’re wider. If you’re new to this new longboarding trend, then you might be wondering how to slide on a longboard.

“Sliding” on a longboard is picking up speed, leaning back and sliding on your belly across the pavement. This blog will give you a few tips that will help you slide like a pro.

If you have ever tried to learn how to slide on a longboard you would know what a difficult process it is to master. If you haven’t tried it then you’re in for a treat. Here is Everything You Need to Know about How to Slide on a Longboard.

What is Sliding on a Longboard and Why Should You Learn How to Do It?

The longboard is a great way to travel long distances. You can ride a longboard for as long as you want and it is much cheaper than a car. Sliding on a longboard is also a great way to get around and can be used for transportation or for fun. Here is some information on sliding on a longboard and why it might be something you want to learn.

If you want to learn more about longboarding, it is important that you learn the basics. One of the most important things in longboarding is sliding. Sliding on a longboard is an amazing feeling. You can do it for fun or for transportation. There are several ways to learn sliding. Here is a guide explaining the basics of sliding on a longboard.

In simple terms, sliding is using your body weight and roll to move your board over snow in a way that allows you to travel with greater speed. To hold that curve or line as you start to pick up speed again, it’s important to have good balance and control over your board as well. When you feel like you’re slowing down enough, bring the board back up then let it slip out of traction so that you can start to go faster again.

How to Slide on a Longboard

Longboarding is an exciting hobby that people of all ages can enjoy. By following these five steps, you can learn how to longboard with ease.

  • First, tighten your shoes.
  • Second, push off with your back foot.
  • Third, push yourself forward.
  • Fourth, steer with your front foot.
  • Fifth and finally, enjoy gliding in the air, down the street and have a great time longboarding!

Longboarding is a great hobby. It’s incredibly fun and lets you see places you wouldn’t have seen before! All you have to do is stand on the board and you’ll be gliding around the street in no time! However, it is important to know how to slide on a longboard before hitting the streets with one. First, put on your helmet and your pads.

Then leaning over, and holding on to the side of the board you’ll want to stand on, you want to make sure you’re standing far enough away to pivot. Finally, with one foot, pivot your body while pushing on the board and before you know it you’ll be gliding around like a pro!

What Equipment do I need to start sliding?

equipment of a longboard
equipment of a longboard

As a beginner, one of the questions you are most likely to ask yourself is what equipment do I need to start sliding? With all the different options available, it can be difficult to know what to choose for your first slide. This blog will look at the different types of equipment available and give you a list of items that you should consider.

Learning how to slide on a longboard takes time, but with the right equipment, it’s fairly simple. The wheels are what will determine whether or not you can slide properly, no matter the sliding surface. For good kickslide action, look for wheels with a stone-ground surface (aka pre-broken in).

These have the right amount of grip vs slip and should make learning how to slides easier. Wheels with too much grip can cause you to struggle when starting out; keep that in mind before making your purchase. Smooth surfaces also work best so look into those as well if you’re up for learning new tricks and skills!

So here we enlist some of the necessary equipment for sliding. Let’s explain one by one.

Sliding Gloves: Are Necessary?

sliding gloves
sliding gloves

Yes. The purpose of sliding gloves is to protect the hands of the sliding player. Nothing can be done about the slide and the bruises that you will get from the slide. However, sliding gloves can prevent cuts that might be caused by the metal spikes.

Sliding gloves can protect your hands by reducing the friction between the ice and the gloves. It can prevent your hands from getting blisters and reduce the pain of your hands after sliding on the ice. Sliding gloves are usually made of leather and it has two parts. The leather palm part is used to protect your hand while the other part is soft.

Most of the gloves are combined with soft cloth and cushions.  Different brands of sliding gloves vary in design, material and price. The most popular brand of gloves is Rohnson which is from Sweden. The most popular one is Hestra Sliding gloves, which are made of 100% leather.  The price of these sliding gloves is about $60-$120.


longboard helmet

Why you need to wear a helmet when you board? Longboards can be fast and reckless, but they can be just as fun and safe. The key to staying safe while longboarding is to wear the proper gear. Some of the products include longboard sliding helmets and protective gear that prevent injury while sliding.

Longboard helmet is a kind of protective equipment, it will protect your head from serious injure in some hard smash or fall. However, when it comes to why to choose longboard sliding helmet exactly, that is a great question. When you are riding your longboard, you will feel a little bit different if you wear a helmet,

it is a little bit heavier and a little bit more uncomfortable. But we still recommend you to wear a helmet for protect yourself if something serious happens. Compared with short board helmet, long board helmet is a little more protective, it has lower crown and more coverage.

knee pads for sliding longboard

Knee pads for longboarding are important for your safety. You will not damage your knees even longboarding in rough terrain if you wearing knee pad. Without the knee pad, the bone and tissue around your knees will be rubbed by the longboard. And you will feel a lot of pain. But with the knee pad, you can move freely on the longboard since the knee pad will protect your knees. It also helps you to make your knee stronger.

Longboarding is one of the most popular extreme sports today. It is simple to learn, but it takes a long time to master. One of the factors that will improve your longboarding skills is the pads you wear. Whether it is on a downhill or a slalom run, knee pads, pads, and wrist pads are very important to ensure that you have good protection.

The purpose of using knee pads while longboarding is to better protect the knees while using a longboard.

Longboard- choosing a sliding longboard

sliding longboard

I would recommend you to buy a high-quality board, because it is expensive but it is worthy. So do not forget to check the deck, wheels, trucks and bearings. Simple design and style is also very influential when choosing a longboard.

Your weight will determine the size of your board. If you’re heavier, you’ll need a bigger board. If you’re lighter, you’ll need a smaller board. If you are average size and weight, then go with a board in the middle of the size range. You can always adjust the size of your board later.

A good longboard brand with quality trucks will cost around $200. If you don’t want to drop that much money on a longboard then there are some sites online that has cheap longboards for sale for around $30.

Longboard sliding technique: The Coleman Slide

The basic idea of longboarding is that you should be able to move your body in a more controlled and efficient way. The basic idea of longboard sliding is that you should be able to use your body in an efficient way to do tricks. For example, if you are sliding down a hill, you should use your skateboard in a way that you can ride in a very efficient way. You don’t want your wheels to rotate and you want the skateboard to move in such a way that you can control your movement.

The Stance

Coleman slides are integral to hyper-lean skating and they were named after famed downhill racer Cliff Coleman. They involve crouching low while you’re riding and sliding on one’s heels (kind of like sitting in a chair) with the lead hand placed firmly on the ground. It is crucial that a rider utilize sliding gloves so as not to get any painful abrasions!

When you lean back, your hand should slide at an angle towards the rear truck. Rotation towards this side will move your weight towards the front wheels, and kicking that way will send your weight over to them.

As you roll backward onto your heels, roll your foot out slightly and keep bending your knees to lean further off the board in either direction.

To come back around, kick up off of the ground and rotate back to a normal skating position. This movement should create sufficient friction between the wheels and surface to catch traction and set you back on course in no time!

Video on how to longboard slide

Type of Sliding Longboard- The different styles of longboard sliding.

There are four type of sliding longboard. In this 4 step you can easily learn the sliding longboarding now here We explain one by one in detail.

  • The pendulum (pendy) slides
  • The pre-drifts
  • Stand up slides
  • Sit down/squat slides

The Pendulum Slides

A pendulum slide is a beginner-level sliding trick that involves the use of one’s shoulders to maneuver the board before making a change in direction. A pendulum slide is a lot like push pressing for reps during your workout – it’s very simple and effective yet provides you with something to challenge yourself with and allow you to amp up your daily routine!

When you tip the board by shifting your weight to one side or another, you can help it tip back in the opposite direction. When you shift your weight forward, you’ll be able to regain traction and keep moving smoothly down the hill.

The pre-drifts

A predrift is a special type of longboard maneuver you can do on your skates before turning. It allows you to slow down enough so that you can turn without ending up in the other lanes, or going off the road altogether. This is a staple skating maneuver and one of the most basic ways you can skate safely open roads!

To predrift, you should begin with a normal slide, but then continue to hold it instead of releasing your grip on the board and allowing it to rotate. You can do this in any direction at any degree. The closer to 90 degrees from the imaginary line created by the road that your slide angle is, the less your wheels will rotate during that slide which results in better braking because of even wear to wheels.

Stand up slides

To begin, place your board and yourself in a good starting position. Next, push the board outward into a hard carve until you reach the point where you’ve broken traction on one side of your wheels. After balancing on your board for a brief period of time, let the grip build back up so that you can roll away as usual.

First, you have to make sure that your presentation is arranged in a way that makes it easy to advance through the slides and not become lost in the shuffle.

This can be done by implementing slide layouts when needed, or making the text on each slide one of the same color so that it’s easy to know at a glance which of them are underlined – these are just small things that make it a little easier than preparing for a regular presentation.

Sit down/squat slides

Sit Down Slides – a variation of Stand Up Slides. Unlike regular standup slides in which the skater is standing on top of the deck and not squatting, Sit down slides are like standard upside down slides with slight modifications so that you can be positioned –- starting from standard 5050 position, getting into low squat at or all the way to hugging it out (not sliding yet).

grabbing your board and then pushing off to do a normal Ollie. Focus on getting as low as possible throughout the entire set before actually taking off for a normal Ollie back up. Don’t let your legs crossing cause you any problems! This can be developed further into Ghetto Grinds and/or Back Foot Slide Inverts!


Longboarding is an excellent way to get some exercise, and to travel down the road, to school, or to work, or to just have some fun. You can choose between a variety of sizes and lengths of longboards. They can all be used to slide. The purpose of this article is to describe and explain the basic techniques of longboard sliding and safety. So I hope this article will be helpful for you to learn longboard sliding. If you have any query regarding how to learn longboarding then fell free contact me via email.  

Related Post

what is carving on a longboard

best longboards

Best longboard for sliding

Leave a Comment